Item # MB14108-30, Amana Tool Carbide-Tipped Double-Face Melamine 14 Inch Dia x 108T H-ATB, -6 Deg, 30mm Bore
$241.73
Download as PDF
Thank you for shopping with us!
Designed specifically to cut melamine, this blade does just that without chipping on the top or bottom edges. (Your table saw must be properly tuned, of course).
The special " High ATB" grind (with 25° bevels) slices cleanly through fragile surface coatings like melamine and laminate. Coupled with a thick, heavy-duty plate for added stability, this blade produces extremely smooth cuts. It is easily resharpened.
P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia on 60mm circle.
Warning: Before use, read saw blade safety guidelines in Amana's catalog.
Designed specifically to cut melamine, this blade does just that without chipping on the top or bottom edges. (Your table saw must be properly tuned, of course).
The special " High ATB" grind (with 25° bevels) slices cleanly through fragile surface coatings like melamine and laminate. Coupled with a thick, heavy-duty plate for added stability, this blade produces extremely smooth cuts. It is easily resharpened.
P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia on 60mm circle.
Warning: Before use, read saw blade safety guidelines in Amana's catalog.
| SPECIFICATIONS | |
| Diameter | 14 in |
|---|---|
| Bore | 30 mm |
| Grind | H-ATB |
| Pinholes | 2/7/42 & 2/10/60 |
| Plate | .102 in |
| Teeth | 108 |
| Kerf | 0.126 |
| Manufacturer | Amana Tool |