Compare

Item # TR860T, Everlast 8" Dia 60-Tooth 5/8" Bore .087" Plate 0.056" Thin Rim Plate 0.087" Kerf Thin Rim Saw Triple Chip

$280.24

Download as PDF
Thank you for shopping with us!

The perfect saw to use where there is a need for a minimum of stock removal per cut, as in the cutting of plastic or veneer strips for edge banding. Maximum depth of cut on Thin Rim blade is 1-3/4 inches.

Alternate design with thin saw plate and thick support hubs on both sides is available.

Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.

SPECIFICATIONS
ManufacturerEverlast
Bore5/8 in
Diameter8 in
GrindTCG
Kerf0.087 in
PlatePlate Thickness 0.087"/2.2mmThin Rim Plate Thickness 0.056"/1.4mm
Teeth60
Hook Angle10 deg