Item # TK1210AN, Everlast 12" Dia 100-Tooth 1" Bore 0.080" Plate 0.110" Thin Kerf Saw - Alternate Top Bevel
$175.13
Download as PDF
Thank you for shopping with us!
Thin kerf blades create less power drain on machine and allow for minimum of stock waste.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance crosscutting.
Thin kerf blades create less power drain on machine and allow for minimum of stock waste.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance crosscutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1 in |
| Diameter | 12 in |
| Grind | ATB |
| Kerf | 0.110 in / 2.8 mm |
| Plate | 0.080 in / 2.0 mm |
| Teeth | 100 |
| Hook Angle | -2 deg |