Item # DFLC30010, Everlast Astra Series 300mm Diameter 100-Tooth 30mm Bore 0.087" Plate 0.115" Kerf Solid Surface Saw - TC45
$280.71
Download as PDF
Thank you for shopping with us!
Designed to provide seam quality cutting on solid surface materials such as Corian®, Staron®, Avonite®, Gibraltar®, etc. Special clearances provide a finish that requires virtually no sanding or polishing.
Modified Triple Chip Grind - TC45 - This design starts with TCG configuration, but the STR (raker) tooth has small 45 degree chamfer. The addition of this chamfer, along with special clearances, provides the best possible finish on double face laminate and solid surface materials. This design provides good service life with excellent surface finish on table saws and radial arm saws.
Designed to provide seam quality cutting on solid surface materials such as Corian®, Staron®, Avonite®, Gibraltar®, etc. Special clearances provide a finish that requires virtually no sanding or polishing.
Modified Triple Chip Grind - TC45 - This design starts with TCG configuration, but the STR (raker) tooth has small 45 degree chamfer. The addition of this chamfer, along with special clearances, provides the best possible finish on double face laminate and solid surface materials. This design provides good service life with excellent surface finish on table saws and radial arm saws.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 30 mm |
| Diameter | 300 mm |
| Grind | TC45 |
| Kerf | 0.115 in |
| Pinholes | 2/7/42;2/10/60 |
| Plate | 0.087 in |
| Teeth | 100 |
| Note | MICRO 5 extra hard tips provide 3 to 5 times longer service than standard carbide.extra hard tips provide 3 to 5 times longer service than standard carbide. |