Item # 55380, Amana Tool Carbide-Tipped Classical Reversible Stile and Rail Assembly 1-5/8" Dia x 11/16" CH x 1/2" Shank
$85.43
Download as PDF
Edge of Arlington offers free shipping in the United States when you choose flat rate shipping.
Amana Tool Carbide-Tipped Classical Reversible Stile and Rail Assembly 1-5/8" Dia x 11/16" CH x 1/2" Shank
Cut both the stiles & rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, the result is a perfect fit. The assembly order for each setup is shown in the images. Use in a table-mounted router. Guide straight cuts with the fence and use the pilot bearing only for cuts on curved rails or stiles.
Stile & Rail assemblies can be used on 5/8" through 7/8" material.
Amana Tool Carbide-Tipped Classical Reversible Stile and Rail Assembly 1-5/8" Dia x 11/16" CH x 1/2" Shank
Cut both the stiles & rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, the result is a perfect fit. The assembly order for each setup is shown in the images. Use in a table-mounted router. Guide straight cuts with the fence and use the pilot bearing only for cuts on curved rails or stiles.
Stile & Rail assemblies can be used on 5/8" through 7/8" material.
| SPECIFICATIONS | |
| Flute | 4 |
|---|---|
| No. of Pieces | 1 |
| Size | 9/16x18 |
| Tap Drill Size | 33/64 |