Item # 54288, Amana Tool Special Interest Molding Carbide-Tipped 1 3/4" D x 3/8" R x 1/2" Shank 2-Flute w/Ball Bearing Guide
Download as PDF
Thank you for shopping with us!
Amana Tool Special Interest Molding Carbide-Tipped 1 3/4" D x 3/8" R x 1/2" Shank 2-Flute w/Ball Bearing Guide
Designed for routing architectural and furniture moldings and trim, these bits should be used in a 2+ horsepower, table-mounted router—many should be run at reduced speed. Although most have ball bearing guides, guiding the cuts with a fence is recommended.
Warning: Maximum RPM = 18,000
Amana Tool Special Interest Molding Carbide-Tipped 1 3/4" D x 3/8" R x 1/2" Shank 2-Flute w/Ball Bearing Guide
Designed for routing architectural and furniture moldings and trim, these bits should be used in a 2+ horsepower, table-mounted router—many should be run at reduced speed. Although most have ball bearing guides, guiding the cuts with a fence is recommended.
Warning: Maximum RPM = 18,000
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 3/4 in |
| Cut Height, Length, or Width | 1 in |
| Bearing(s) | 47706 3/16 ID x 1/2 OD x .195 Thick Steel Ball Bearing Guide |
| Flute | 2 w/Bearing |
| Overall Length | 3 in |
| Radius | 3/8 in |
| R1/Radius | 3/32 in |
| Shank | 1/2 in |
| RPM | Warning: Maximum RPM = 18,000 |