Item # 47178, Amana Tool Carbide-Tipped 5/8" Dia, 1/4" Shank 10° Bevel Cutter Assembly (Replaces Ocemco #TA-151)
$29.66
Download as PDF
Thank you for shopping with us.
Amana Tool Carbide-Tipped 5/8" Dia, 1/4" Shank 10° Bevel Cutter Assembly (Replaces Ocemco #TA-151)
-No resharpening
-Interlocking hex design
-Economical alternative to brazed bits
Cut straight and flush with each and every cut without ever resharpening your bits. E-Z Change™ router bits are an economical alternative to standard router bits. They feature replaceable head carbide-tipped cutters, saving you money by replacing only the cutters instead of the entire tool when the knives become dull. You won't need a second bit while yours is in the sharpening shop; instead, just change the cutters. You won't even lose your set-up because the E-Z Change™ cutters can be replaced with the bit in the router collet. The interlocking hex design guarantees that the cutting surfaces will not slip during use.
Excellent for Cutting: Laminates, MDF, Plywood, Wood, Acrylic
Amana Tool Carbide-Tipped 5/8" Dia, 1/4" Shank 10° Bevel Cutter Assembly (Replaces Ocemco #TA-151)
-No resharpening
-Interlocking hex design
-Economical alternative to brazed bits
Cut straight and flush with each and every cut without ever resharpening your bits. E-Z Change™ router bits are an economical alternative to standard router bits. They feature replaceable head carbide-tipped cutters, saving you money by replacing only the cutters instead of the entire tool when the knives become dull. You won't need a second bit while yours is in the sharpening shop; instead, just change the cutters. You won't even lose your set-up because the E-Z Change™ cutters can be replaced with the bit in the router collet. The interlocking hex design guarantees that the cutting surfaces will not slip during use.
Excellent for Cutting: Laminates, MDF, Plywood, Wood, Acrylic
| SPECIFICATIONS | |
| Diameter | 5/8 in |
|---|---|
| Manufacturer | Amana Tool |
| Bearing(s) | 47706 |
| Cut Height, Length, or Width | 1/2 in |
| Diameter (D1) | 1/2 in |
| Replacement Parts | 1/4 Shank Arbor 47624 (Screw 67096, Washer 67124 included) |
| Flute | 2 |
| Note | Replaces OCEMCO #TA-151 |
| Overall Length | 2 in |
| Part Desc | Bevel/Tapered Trim Cutter |
| Shank | 1/4 in |
| Angle | 10 deg |
