Hougen “12,000 Series” 54mm dia Annular Cutter – Stacked Geometry

Thank you for shopping with us!

Hougen "12,000-Series" Annular Cutters with a Stack-Cut tooth geometry must be used whenever two or more plates are being drilled simultaneously. When drilling multiple pieces with traditional cutters, after the first piece is drilled, you need to stop and remove the slug before continuing on through the second piece.

Not a problem with stack cutters. Drill straight through without stopping.

Most sizes of “12,000-Series” cutters are available from stock with stack cut geometry. All sizes are available by special request with stack-cut geometry.

Hougen’s Technical Service Department should be contacted whenever special tooth geometry and applications will be necessary.

• Cuts holes faster
• Longer tool life
• Lower cost per hole
• Precision tooth geometry
• For the widest range of materials
• Resharpenable

For use with Hougen® Portable Magnetic Drills and many competitive models on materials up to 6" thick. They are made from hardened M2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. "12,000-Series" cutters have a 3/4" diameter double-flatted shank for extended tool life and lower cost per hole.

"12,000-Series" Cutters are resharpenable. Modified end tooth geometry is also available for drilling in stacked plate applications.