Lamello Zeta P2 Biscuit Joiner Set with Diamond Cutter, Drill Jig & New Updated Systainer Case

Thank you for shopping with us!

The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P connector range in particular, and is used to connect wood materials.

The integrated vertical mechanical drive on the cutting spindle of the Zeta P2 is the centerpiece of this profile biscuit joiner. During the cutting process, the vertical mechanical drive automatically performs a vertical movement to create the profile groove. All P-System fittings are then manually inserted into this groove, ensuring a fast form-locking anchorage.

The Zeta P2 can cut P-System grooves for connecting fittings with varying installation depths simply by turning the P-System depth adjuster, thus removing the need to change cutters.

The vertical movement for the profile groove is triggered automatically when the maximum cutting depth is reached and requires just a fraction of a second. The vertical mechanical drive combines process security and reliability with a low-wear, fully mechanical construction.

The Zeta P2 can also be employed as a standard biscuit joiner for original biscuits by simply deactivating the profile groove function and changing to a 4mm blade.

Tips and Tricks

Angle joints with the Zeta P2

Drill a 6mm Clamex P access hole into the edge

Connect dividing panels from 16mm with the Tenso P-10 and the P-System depth adjuster cap 4mm for P-8

Use the P-System configurator to determine connector positions in workpieces

Divario P-18 - Invisible, self-clamping push-in fasteners

Power: 800 W
Voltage: 120 V
Speed: 9,000
Cutter: Carbide-tipped profile groove cutter / Diamond-tipped profile groove cutter Ø 100 x 7 x 22 mm
Teeth: 3
Max. cutting depth: 20 mm
Weight: 8.2 lbs.