Tenryu Steel-Pro® Series

Thank you for shopping with us!

Low RPM Dry Cut Saws. Circular Saws.

Tenryu’s steel cutting carbide-tipped saw blade gives industrial performance.

Cut ferrous metals (mild steel) faster, cleaner, and easier. Save time, money, the environment, and your respiratory health.

Tenryu’s complete series of steel cutting saw blades called “Steel-Pro®” makes light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod, and many more.

Specially formulated C-6 carbide grade, combined with our unique tip design, resists breakage on impact and lasts much longer than standard carbides or abrasive discs. Special tooth geometry with “inserted” tooth design greatly improves security of the tip, efficiency, and durability.

Abrasive discs throw sparks and lots of dust, including unhealthful fiberglass. Steel-Pro® blades reduce spark production and eliminate abrasive wheel dust.

Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro® blades allow you to keep working, eliminating down time for frequent blade changes. In addition, Steel-Pro® cuts 5 to 10 times faster than abrasives. Typically, one Steel-Pro® blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive “down time.”

Abrasive discs leave a sharp blurr at the cutting edge that must be removed later. Steel-Pro® blades cut clean, eliminating this extremely time-consuming after-cut process. “Time is money”—Steel-Pro® saves you both!

Each Blade Features:
-Rugged plates and specially-formulated carbide tips with a special tooth grind for fast, clean cuts.
-High quality cuts without the clouds of dust and scorch marks associated with friction blades.
-Cool cuts that leave the workpiece edge free of burrs.
-With fewer blade changes, reduced cost-per-cut and maximized performance for the operator.

Note: Please note all safety instructions before use and adhere to instructions for maximum RPM speeds. Always wear eye protection that meets ANSI Z87.1 requirements and properly functioning upper and lower blade guards.

For cordless saws, see also Cord-Free for mild steel saw blades

Item # ManufacturerApplicationArborKerfDiameterGrindTeeth Price Add To Cart
Compare PRF-18538BW TenryuGood for 1/8 in to 1/4 in wall thickness5/8 in KO0.0797 1/4 inATB38 $48.60 Add to cart
Compare PRF-18548BW TenryuSignature Steel-Pro blade for mechanical construction; up to 1/8 in wall thickness5/8 in KO0.0797 1/4 inATB48 $50.40 Add to cart
Compare PRF-18556CB TenryuMore teeth for cutting thin sheet steel (flat stock only))5/8 in KO0.0717 1/4 inATAF56 $62.10 Add to cart
Compare PRF-18570CBN TenryuFor very thin sheet steel (flat stock only)5/8 in KO0.0697 1/4 inATB70 $65.70 Add to cart
Compare PRF-20348CBN TenryuGeneral purpose; up to 1/8 in wall thickness; for Milwaukee saw5/8 in KO0.0878 inMTCG48 $67.68 Add to cart
Compare PRF-21048BW TenryuGeneral purpose; up to 1/8 in wall thickness; for circular saw5/8 in KO0.0878 1/4 inMTCG48 $67.50 Add to cart
Compare PRF-23048CBN TenryuGeneral purpose; up to 1/8 in wall thickness; for 9 in saws1 in0.0879 inATB48 $72.00 Add to cart
Compare PRF-25550D TenryuGeneral purpose; up to 1/8 in wall thickness; for 10 in dry cutters only1 in, 5/8 in0.09110 inTCG50 $109.80 Add to cart
Compare PRF-30560D TenryuGeneral purpose; up to 3/8 in wall thickness; for 12 in dry cutters (Jepson, Makita, etc)1 in0.09812 inTCG60 $115.20 Add to cart
Compare PRF-35572D TenryuGeneral purpose; up to 3/8 in wall thickness; for 14 in dry cutters1 in0.09414 inTCG72 $171.00 Add to cart
Compare PRF-40580D TenryuFor dry cutters; or foam insulated panel cutting w/Makita beam saw1 in0.102TCG80 $468.00 Add to cart
Compare PRF-18548CBWD TenryuFor mechanical construction; up to 1/8 in wall thickness5/8 in KO0.0797 1/4 inATB48 $50.49 Add to cart