Category Archive: Amana Tool Router Bits
Up to 800 inches per minute!* For cutting 3/4″ material thickness in one pass. 3-Flute for improved surface finish. Only 1/4″ diameter equals minimal material waste.
- Use a three-flute bit where fine finish is paramount. Three flutes balance the bit, eliminating vibration that degrades the cut finish. Three cuts per revolution yield a smooth surface and increased feed rates. 45408-3 features a solid carbide cutting edge.
- Excellent for nesting and grooving at an extremely fast feed rate, which increases cost savings.
- 1/4″ cutting diameter CNC nesting router bit with solid carbide cutting edges brazed into steel 1/2″ shank.
- The unique design contributes to superb performance and excellent cutting results.
- Designed primarily for high speed CNC production.
- Long lasting, fine micrograin extra hard carbide results in long tool life before re-sharpening.
Laminated Particle Board, MDF & Melamine: Feed rate up to 800 IPM** at 18,000 RPM***
Plywood: Feed rate up to 500 IPM** at 18,000 RPM***
*Up to 800 IPM feed rate at 18,000 RPM cutting laminated particle board. Rate may change depending on material and CNC machine type.
**IPM: Inches Per Minute
***RPM: Revolutions Per Minute
Fusion 360 compatible tool file for 45408-3 available for download, CLICK HERE.
For more, refer to our CNC Manual.
To peruse our online catalog or to place an order, visit EOASAW.com or call us at 817-461-7171.
Have any questions? Feel free to ask us in the comment section, give us a call, send us an email, or visit us on Facebook!
For more informative EOASAW blog posts, visit our main Blog Page.