Item # TCS1740N, Everlast 17" 40-Tooth 50mm Bore Truss & Component Saw
$354.91
Download as PDF
Thank you for shopping with us!
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (82°) holes will accept 5/16" flat head bolt.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance cross cutting.
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (82°) holes will accept 5/16" flat head bolt.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 17 in |
| Bore | 50 mm |
| Countersink | 6-Right |
| Grind | ATB |
| Hole Size | 6/64mm Bolt Hole Circle Dia |
| Hook Angle | 10 deg |
| Kerf | 0.189 in - 4.2 mm |
| Plate | 0.150 in - 3.8 mm |
| Teeth | 40 |
| Machine | Mitek |