Item # DFL1080305, Everlast 10" Dia 80-Tooth 5/8" Bore .087" /2.2mm Plate 0.115" /2.9mm Kerf MICRO-5 Double Face Laminate Saw - 30º ATB
$145.00
Download as PDF
Thank you for shopping with us!
The perfect saw for cutting double-sided materials such as Melamine, Kortron, and Veneer. Can be used on radial or table saws.
High Alternate Top Bevel - Hi ATB - Identical configuration to ATB, but each tooth has top bevel of 30 degrees or more. The greater angle can cause faster wearing/dulling. Combine with Micro-5 carbide to increase time between sharpenings. Ideal for cutting of laminated materials. Provides a fine cutting finish with proper sharpening. An Alternate Face Bevel (AFB) can be added to this design upon request.
MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide.
The perfect saw for cutting double-sided materials such as Melamine, Kortron, and Veneer. Can be used on radial or table saws.
High Alternate Top Bevel - Hi ATB - Identical configuration to ATB, but each tooth has top bevel of 30 degrees or more. The greater angle can cause faster wearing/dulling. Combine with Micro-5 carbide to increase time between sharpenings. Ideal for cutting of laminated materials. Provides a fine cutting finish with proper sharpening. An Alternate Face Bevel (AFB) can be added to this design upon request.
MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 5/8 in |
| Diameter | 10 in |
| Grind | 30 deg ATB |
| Hook Angle | -5 deg |
| Kerf | 0.115 in |
| Plate | 0.087 in |
| Teeth | 80 |
| Pinholes | -- |