Item # 55314, Amana Tool Carbide-Tipped 45° Miter Joint Under-Cut Assembly 4-Wing w/ " Ultra-Glide™" Ball Bearing Assembly 1 3/8" Dia x 1/4" x 1/2" Shank
$61.16
Download as PDF
Edge of Arlington offers free shipping in the United States when you choose flat rate shipping
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.
A - Laminated top is " undercut"
B - Apron laminate is pre-cut at 45°
C - Adhere pre-cut laminate for a perfect fit. A fine file may be used to remove the sharp edge after joining
SPECIFICATIONS | |
Diameter | 1 3/8 in |
---|---|
Cut Height, Length, or Width | 1/4 in |
Overall Length | 2 3/8 in |
Shank | 1/2 in |
Wings | 4-Wing w/ "Ultra-Glide™" Ball Bearing Assembly |
Angle | 45 º |